Cabinet Refacing in Brookhaven, GA
The useful starting point for this Brookhaven room is finish care, recorded on the plan; a neighborhood label does not establish the cabinet specification or expected outcome. For cabinet refacing in Brookhaven, compare the proposed product specifications, support requirements and exposure limits for the measured layout and selected products before selecting the assembly. Brookhaven Cabinetry Co assesses the boxes first and tells you honestly which direction fits the room.
- Itemized written quotes
- Measured before ordering
- Semi-custom to full custom
Request a written quote
Or call (562) 203-3232. Calls only, we do not receive text messages.
About our cabinet refacing
The difference between refacing and replacement comes down to what you want to change. If the layout stays and the bones are sound, painted to stained or stained to painted is a finish project. If the room needs a wall opened or a pantry added, that is a replacement conversation. Call Brookhaven Cabinetry Co to find out which your kitchen is.
Why Brookhaven Cabinetry Co
How We Work
One conversation in your home, one measure, one written quote, then an install date.
Why a 2010s kitchen refaces well
For a Brookhaven homeowner considering why a 2010s kitchen refaces well, start with drawer loads, island access, storage dimensions as measured in the existing room rather than assumptions about local housing age or resale expectations. The bones are genuinely good, which is why the boxes hold their doors and the drawers still glide. What ages is the finish, the door profile and the hardware, all of which sit on the surface rather than inside the structure.
The useful starting point for this Brookhaven room is the measured layout and selected products, recorded on the plan; a neighborhood label does not establish the cabinet specification or expected outcome; review this point in the why a 2010s kitchen refaces well discussion. When only the finish is wrong, the change is a finish project, not a structural one. For cabinet refacing in Brookhaven, ask how the proposed box or door substrate, finish and edge details suit the actual conditions described in why a 2010s kitchen refaces well and request the applicable product documentation before accepting a performance or price comparison. A full replacement would throw away boxes that still function perfectly and carry a much higher cost for no structural gain.
Inspect the measured layout and selected products in the actual Brookhaven property before choosing the cabinet refacing scope; neighboring homes do not establish the condition or layout here. That footprint usually lacks a pantry, and the wall that holds the cabinets has no room for one behind it. Refacing changes the faces but cannot open the wall or add the storage the layout never had, which is why the originals are a replacement question rather than a refacing one. The decision starts with whether the bones and the layout do the job, not with the finish.
Painted to stained: new doors and veneer
Stain goes into the wood and paint sits on top of it, which is why you cannot stain over a painted door front. The pigment from the old finish has soaked into the grain, and sanding it out would destroy the panel profile. So a painted to stained change means new doors and drawer fronts in the new species, plus a matching veneer applied to every exposed box face, the base panels, the end panels and the filler strips between boxes.
The box faces are where the veneer matters most. Base cabinets have a side and a front rail that show around the new doors, and wall boxes have a side and a bottom edge visible. When evaluating painted to stained: new doors and veneer, request the specific Brookhaven project product sheet and check its stated limitations against door alignment; the material or finish name alone is not proof of performance. Georgia's humid summers move solid wood, so the veneer and the door faces are selected and milled with that movement in mind, and the finish is set so the door and the face read as one surface.
The grain direction of the new door fronts is set so it runs consistently across the run, because on a white oak or walnut face, mismatched grain reads immediately. Framed boxes show the new veneer on the face frame and the end panels, and the filler strips are veneered last so the seams sit in the shadow lines rather than across a flat stretch of grain. The aim is that you cannot find where the old box ends and the new face begins.
Stained to painted: what can be kept
The reverse direction is cheaper because more of it is kept. The useful starting point for this Brookhaven room is drawer loads, finish care, door alignment, recorded on the plan; a neighborhood label does not establish the cabinet specification or expected outcome. Shaker and slab profiles take a painted finish well; an ornate raised panel with deep shadow lines is harder to make read as a clean painted surface.
What still gets replaced in a stained to painted change is the hardware and any door whose grain or profile does not paint cleanly. A dark stain can show through light paint if the prep is not thorough, so the boxes are inspected for what will telegraph through the new finish. When kept, the savings are real, which is why this direction tends to run toward the lower end of the refacing range.
Hardware changes usually ride along with the reface. The soft-close hinges that came on the builder-grade doors can stay if they still hold true, or the whole set moves to soft-close if the old hinges are worn. Undermount slides on the drawers are part of the change when a worn slide is the reason a drawer no longer closes smoothly.
Refacing cost versus replacement
Refacing cost versus replacement cost is the question that settles most projects. Within refacing, the direction matters first. For cabinet refacing in Brookhaven, request an itemized written quote for the complete replacement scope, with installation and any related trade work identified separately. A painted to stained change, with new doors in a new species and a veneer on every box face, sits toward the higher end of that same range.
What moves the refacing price beyond that is the same grade ladder and finish ladder that drives any cabinetry order. When evaluating refacing cost versus replacement, request the specific Brookhaven project product sheet and check its stated limitations against finish care, door alignment; the material or finish name alone is not proof of performance. Drawer fronts outnumber doors, and soft-close hinges and undermount slides are part of the change, not an extra. Tall pantry doors, an appliance garage, glass door inserts and crown molding each add to the count.
The genuine saving in refacing comes from what it avoids, not from the finish alone. The countertop, the sink and the plumbing all stay, because the boxes do not move. Wall, floor and ceiling surfaces are untouched, which keeps the schedule short and the waste low. For a Brookhaven kitchen built in the 2010s, that is usually the difference between a finish project and a full renovation, and the written quote shows both directions clearly before you decide.
For cabinet refacing in Brookhaven, ask for a current written quote that separates the selected products, installation and related work when discussing refacing cost versus replacement, including the inclusions and exclusions for this part of the proposal. Replacement also carries demolition, disposal and any wall or plumbing changes, which refacing avoids. These refacing figures are estimates, subject to change, and the written quote fixes the final price.
The same kitchen, refaced
BeforeAfterThe process
From first call to installed cabinets
Four steps, and you make a decision at the end of each one before the next begins.
Call or send the form
We call back, talk through the room and what you want from it, and set a time to visit.
Measure and design
A field measure, then a layout with door style, finish and hardware you can see before you commit.
Written quote and order
An itemized quote with the lead time on it. Cabinets are ordered against the measured drawing once you sign.
Delivery and install
Boxes are checked on arrival, set level and scribed to the walls, doors adjusted, then a walk-through with you.
More of What We Build
Service area
Where We Work
Questions
Cabinet Refacing: Common Questions
Can a painted kitchen really be refaced to a stained finish?
Yes, but not by refinishing the existing doors. Stain penetrates the wood and paint is a surface film, so a painted door front cannot be stripped back to bare wood and stained. A painted to stained change uses new doors and drawer fronts in the new species, with a matching veneer applied to the exposed box faces. The result is a stained kitchen, with new wood where it shows.
Which direction is cheaper, stained to painted or painted to stained?
Stained to painted tends to be the cheaper of the two. When the existing doors are a paintable species and the profile suits a painted look, the doors are prepped, painted and reinstalled on the same boxes. A painted to stained change needs new doors and a full veneer on the box faces, which carries more cost. Both are ranges, and the measure visit confirms which fits your kitchen.
How do I know if my boxes are sound enough to reface?
The measure visit settles it. For cabinet refacing in Brookhaven, ask how the proposed box or door substrate, finish and edge details suit the actual conditions described in how do i know if my boxes are sound enough to reface and request the applicable product documentation before accepting a performance or price comparison. For cabinet refacing in Brookhaven, ask how the proposed box or door substrate, finish and edge details suit the actual conditions described in how do i know if my boxes are sound enough to reface and request the applicable product documentation before accepting a performance or price comparison. The visit checks the boxes, the walls and the layout before any recommendation is made, and the written quote reflects only the work that fits.
How long does a reface take compared to a full replacement?
A reface is shorter because the boxes stay and there is no demolition, disposal or wall work. The time depends on the direction: a stained to painted change keeps the doors and can be quicker, while a painted to stained order with new doors and veneer carries a semi-custom lead time in the same weeks as the cabinet order. The measure visit sets a realistic schedule before you commit.
Do you cover Brookhaven and the surrounding DeKalb County area?
Use the conversation with Brookhaven Cabinetry Co to ask the responding provider about the measured layout and selected products for cabinet refacing in Brookhaven, and document any agreed responsibility in the proposal. Because the boxes are inspected and measured on site, the service area is confirmed at the time of booking. Call to check the current schedule for your neighborhood before the measure visit is booked.
What does the written warranty cover?
Request the proposed warranty documentation for cabinet refacing before accepting the Cabinet Refacing in Brookhaven project agreement. Ask at the measure visit to review the current written warranty terms so you know what is covered before you sign the order.
Talk to us about cabinet refacing
Tell us about the room, in Brookhaven or anywhere in the service area, and we call back to set up a visit.
Calls only, we do not receive text messages.