Wholesale Cabinets for Contractors in Brookhaven, GA
When the cabinet package lands late on a build, every trade behind it pays: the countertop template waits, the appliance set waits, the walkthrough slips. Use the conversation with Brookhaven Cabinetry Co to ask the responding provider about the measured layout and selected products for wholesale cabinets for contractors in Brookhaven, and document any agreed responsibility in the proposal.
- Itemized written quotes
- Measured before ordering
- Semi-custom to full custom
Request a written quote
Or call (562) 203-3232. Calls only, we do not receive text messages.
About our wholesale cabinets for contractors and builders
Supply runs from single kitchen packages for spec and custom homes to repeat unit sets for multifamily renovation, framed and frameless, full overlay or inset, delivered ready for your own crew or installed by ours. Send plans or a unit count and the bid comes back written: every box itemized, lead time confirmed before the order, deliveries staged floor by floor where the building needs it, unit pricing a developer can hand to a lender.
Why Brookhaven Cabinetry Co
How We Work
One conversation in your home, one measure, one written quote, then an install date.
Who this supply serves
Brookhaven Cabinetry Co quotes contractor cabinetry three ways: a single package for one house, a per-unit price for a repeat floor plan, and a project price covering every phase of a renovation. Builders finishing spec and custom homes in the neighborhoods around Peachtree Road order one kitchen at a time. For a Brookhaven homeowner considering who this supply serves, start with the measured layout and selected products as measured in the existing room rather than assumptions about local housing age or resale expectations. Developers and property managers renovating apartment communities along the corridor order identical unit sets delivered in phases.
The product is semi-custom and custom cabinetry, framed or frameless, full overlay or inset, in door styles from slab to shaker to raised panel. Boxes arrive assembled and wrapped. A supply-only delivery leaves the setting to your crew. An installed package adds the set, the level and the scribe, and the countertop template follows the day after the boxes are set.
Not quoted: RTA flat-pack kits, repair calls, painting work and manufactured casework. If the scope is fitted boxes for kitchens, baths, closets, pantries, laundry rooms or garages, in one house or across a portfolio of units, it is quotable here.
How wholesale cabinet pricing is built
Contractor pricing starts from the same grade ladder a homeowner sees, moved by volume. Stock boxes sit at the bottom of the ladder. When reviewing how wholesale cabinet pricing is built, ask how the selected semi-custom line and its available modifications changes the Brookhaven proposal and which allowances remain provisional. For wholesale cabinets for contractors in Brookhaven, request an itemized written quote for the proposed custom fabrication and finish details, with installation and any related trade work identified separately. Compare proposals for retaining sound boxes and changing the fronts using the actual Brookhaven room measurements and the same agreed inclusions, rather than a generic price allowance; review this point in the how wholesale cabinet pricing is built discussion. Repeat identical units are the volume lever: every box after the first is cut to a spec already in production, so the per-unit figure typically lands below the one-off price.
Inside any grade, the drivers are the same for a builder as for a homeowner. Linear feet and box count set the base. Door style moves the price up the ladder from slab to shaker to raised panel to inset. Painted MDF costs less than wood species such as maple, white oak, walnut or hickory. Plywood boxes generally carry a higher upfront material cost than particleboard, and builders often compare edge banding, core density, and screw retention ratings when planning for regional climate conditions. Drawer banks cost more than door fronts of the same width. Soft-close hinges, undermount slides, dovetail joinery, tall pantry units, trash pull-outs and lazy susans are each line items, and a repeat unit with thirty openings feels every one of them.
Project conditions move the number from there. Demolition and disposal when the old boxes come out, wall and plumbing changes behind them, countertop integration on top of them, and lead-time pressure on the order all carry their own lines. A supply-only delivery typically prices below the installed figure by the install labor it leaves out. Every figure on this page is an estimate, subject to change, and the written bid sets the final price for each project.
From takeoff to phased delivery
A bid starts from plans or from a site walk. Ground-up work prices from the plans: each unit takeoff lists every box by size and type, and the bid returns itemized the same way, unit by unit and building by building.
Selections are finalized before anything is ordered. Door style, finish, box construction and interior fittings are confirmed once for the whole project. Door and finish samples support the sign-off, and custom packages include layout drawings and a 3D rendering of the typical unit, so a developer approves the design once instead of unit by unit.
For wholesale cabinets for contractors in Brookhaven, agree the actual measurements and product requirements for the measured layout and selected products before committing to the layout or schedule. Deliveries then follow the dates the bid committed to, phased floor by floor or building by building, with boxes inspected on receipt and any freight damage reported and claimed while the window is open. On installed packages the boxes are set, shimmed level and scribed to the walls, doors and drawers are adjusted, and the countertop template follows the next day. Permit questions go to the jurisdiction: Brookhaven and DeKalb County each run their own permitting, and cabinet work inside a permitted renovation usually rides the general contractor's permit.
What separates a good package from a cheap one
When evaluating what separates a good package from a cheap one, request the specific Brookhaven project product sheet and check its stated limitations against drawer loads, finish care, delivery access; the material or finish name alone is not proof of performance. Write the spec against them. Compare the specified core, joints, edge sealing and fastener schedule for the contractor package; material names alone do not establish screw retention through seasonal humidity changes. Dovetail drawer joinery and undermount slides outlast rollers, and soft-close hardware keeps a rental unit quiet long after the tenant moves in.
Finish consistency is the wholesale-specific trap. A phased order delivered across several months can carry visible drift between production lots, so a supplier worth bidding with plans lot consistency into the phasing rather than shipping whatever the warehouse has that week. Insist on inspecting boxes at delivery, while the claim window is open, rather than at install when the freight argument has gone cold.
On installed packages the difference is in the set. A run shimmed level and scribed to the wall reads as furniture. A run screwed to the wall reads as exactly what it is. The bid should state who sets, who levels and who calls the countertop template.
Renovating occupied units
Occupied renovations live or die on phasing. The practical sequence for a unit-turn program is one phase per building or per floor: measure the typical unit, order the identical set, deliver and install inside the access windows the property sets, and close each unit with a punch list before the crew moves to the next. Resident notices, elevator reservations and parking for the delivery truck are coordinated with your team, on the schedule the property already runs.
Identical unit sets earn their keep here. The first unit takes the longest because every box is met for the first time; after that the same box lands in the same opening, and the per-unit install time drops. Between tenants, where the boxes are sound, a reface package turns the unit without touching the boxes, at the lower end of the cost ladder above.
The process
From first call to installed cabinets
Four steps, and you make a decision at the end of each one before the next begins.
Call or send the form
We call back, talk through the room and what you want from it, and set a time to visit.
Measure and design
A field measure, then a layout with door style, finish and hardware you can see before you commit.
Written quote and order
An itemized quote with the lead time on it. Cabinets are ordered against the measured drawing once you sign.
Delivery and install
Boxes are checked on arrival, set level and scribed to the walls, doors adjusted, then a walk-through with you.
More of What We Build
Service area
Where We Work
Questions
Wholesale Cabinets for Contractors and Builders: Common Questions
Do you supply the boxes only, or install them as well?
Both. A supply-only delivery ships assembled, wrapped boxes for your crew to set. An installed package adds the set, the level, the scribe and the door adjustment, and the countertop template follows the day after. The written bid prices each route as its own line, so the two numbers can be compared against your own labor rate.
How is per-unit pricing built for a repeat floor plan?
The first unit is takeoff priced by linear foot and box count, and every unit after it repeats the same cut list. Because the repeat boxes are already in production, the per-unit figure typically comes in below the one-off kitchen price. The bid shows a per-unit figure and a per-building total, so the developer and the lender read the same number.
What lead time should I schedule the trades around?
For wholesale cabinets for contractors in Brookhaven, agree the actual measurements and product requirements for the measured layout and selected products before committing to the layout or schedule; review this point in the what lead time should i schedule the trades around discussion. The bid carries the delivery dates the schedule hangs on, and phased deliveries are anchored to those dates rather than to a warehouse availability promise.
Will you bid from plans?
Yes. Plans in, itemized bid out, unit by unit and box by box. For a Brookhaven homeowner considering will you bid from plans, start with the measured layout and selected products as measured in the existing room rather than assumptions about local housing age or resale expectations. Either route ends in the same document: a written bid with every box named by size and type.
Can you deliver to an occupied building in phases?
Deliveries phase floor by floor and building by building, inside the access windows and notice schedule the property sets. Freight is inspected at delivery, inside the claim window, and repeat units move faster after the first one because the same box lands in the same opening every time.
What paperwork comes with the bid?
The bid itself is written and itemized by unit, box size and type, with lead time, delivery dates and payment terms. Say what your office needs for supplier setup, such as a W-9 or a certificate of insurance, so it is requested with the bid packet rather than after it. Request the proposed warranty documentation for wholesale cabinets for contractors before accepting the Wholesale Cabinets for Contractors in Brookhaven project agreement.
Do you cover jobs outside Brookhaven?
Supply and install cover Brookhaven and the surrounding DeKalb County communities, Chamblee and Doraville included, and projects across the wider metro are quoted by scope. The service radius for a specific job is confirmed when the bid is requested, so call with the address.
Talk to us about wholesale cabinets for contractors and builders
Tell us about the room, in Brookhaven or anywhere in the service area, and we call back to set up a visit.
Calls only, we do not receive text messages.